Thread: Boo Boo Thread!
View Single Post
Old 01-04-2010, 04:59 AM   #18
Bozack
Extraordinary Member
 
Bozack's Avatar
 
Join Date: Aug 2008
Location: Commack, N.Y.
Age: 57
Posts: 1,796
Default

Quote:
Originally Posted by ZO6Vettever View Post
I decided to clean my Sigma real good. Well, I took the sear block apart and it was pretty dirty. I cleaned it and put it back together with the part that holds the sear and springs in backwards. Put it all back together (yes it slides right in place), racked the slide and pulled the trigger. Well, Trigger pull was about 3 lbs. and it broke at about 1/4". Did it a few times and it seemed to function fine. Well, I doubt 1/4" of trigger would be enough spring load to do anything but tickle the primer but would not take a chance carrying that "Plaxico" discharge waiting to happen. Tore it down and found my boo boo. No harm done. I need to start going to BA (Boneheads Anonomous). My name is Vetter and I am a bonehead.
It is not your fault. They should not make parts that will go in backwards.
__________________
Mike
Bozack is offline   Reply With Quote